mirror of
https://github.com/adrianjagielak/home-assistant-futurehome.git
synced 2026-07-07 13:23:03 +00:00
81f8163e1c
Scene controllers such as the Futurehome Modeswitch/Modusbryter (a Z-Wave device) only ever emit `evt.scene.report` on a button press and never appear in the periodic Vinculum state poll. Their address therefore never got an entry in the HA state cache, so live scene events were dropped by the `if (!payload[addr]) continue` guard in haUpdateStateValueReport, leaving the "Scene" entity permanently 'unknown'. - Register an address -> state-topic mapping from the device config so live events can be routed even when the service is absent from the state poll. - Seed the cache entry from that mapping when a report arrives for an otherwise-unknown address. - Preserve previously known values across state polls so a scene value set by a live event is not wiped by a later poll that omits the service. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01BRMavpbsGAcY2ctkKvcoNR
5.1 KiB
5.1 KiB
1.6.3 (01.07.2026)
- Fixed Modeswitch/Modusbryter (and other scene controllers) staying stuck at
unknown. Liveevt.scene.reportbutton presses are now delivered to the "Scene" entity even for services that never appear in the periodic state poll.
1.6.2 (16.05.2026)
- Fix invalid device_class + unit_of_measurement combinations for HA 2026.5 (#32).
1.6.1 (16.10.2025)
- Tweaked 'Ignore Availability Reports' setting.
1.6.0 (16.10.2025)
- Added setting to always treat all devices as up.
1.5.0 (16.10.2025)
- Reverted: Add ability to specify a custom MQTT broker.
1.4.0 (13.10.2025)
- Added ability to specify a custom MQTT broker.
1.3.1 (28.09.2025)
- Revert upgrading dependencies.
1.3.0 (28.09.2025)
- Upgrade dependencies.
- Use proper
lightentity for out_lvl_switch if the device type is "light", instead of genericnumberlevel switch (thanks @Andbli for help!).
1.2.1 (26.09.2025)
- Revert 'Use
lightentity for out_lvl_switch if the device type is "light"'.
1.2.0 (26.09.2025)
- Use
lightentity for out_lvl_switch if the device type is "light".
1.1.2 (24.09.2025)
- Bumped dependencies (#1, #2, #6).
1.1.1 (24.09.2025)
- Added error handling for invalid FIMP messages.
- Updated installation.md - clarified that users must select the MQTT Integration instead of the hub’s MQTT server, with step-by-step guidance provided (@Andbli).
1.1.0 (24.09.2025)
- Stop inclusion/exclusion after the first device is added/removed, just like in the official app.
- Add configuration checkbox for allowing empty Thingsplex credentials (#3).
- Improved GUI security by hiding passwords by default (#4, #5) (thanks @Andbli !).
1.0.2 (16.09.2025)
- Added logging the initial devices response.
1.0.1 (28.07.2025)
- Updated README.md.
1.0.0 (28.07.2025)
Initial stable release
0.1.15 (28.07.2025)
- Added updated installation guide.
0.1.10 (28.07.2025)
- Allowed unpairing of devices using any adapter.
0.1.9 (28.07.2025)
- Added icon.
0.1.8 (28.07.2025)
- Added logo.
- Added support for pairing new devices.
- Added support for unpairing devices.
- Fixed using the unit reported by the numerical sensor.
- Added restarting the add-on when disconnected from the hub or Home Assistant
- Updated demo mode data.
- Added more delays when initializing the demo mode.
0.1.7 (26.07.2025)
- Added setting for enabling debug log.
- Reset all devices each time when starting in demo mode.
0.1.6 (26.07.2025)
- Improved MQTT components interfaces.
- Refactored sensors.
- Added support for 'meter_*' services (electricity meters, gas meters, water meters, heating meters, cooling meters).
- Added support for 'sound_switch' service (sound emitters).
- Added support for 'door_lock' service (door locks).
- Added support for 'user_code' service (keypads).
- Added support for 'schedule_entry' service (for scheduling access).
- Added support for 'doorman' service (Yale door locks).
- Added support for 'complex_alarm_system' service (part of alarm sirens control).
- Added support for 'dev_sys' service (reboot device).
- Added support for 'parameters' service (advanced configuration of a device).
- Hide the fallback 'basic' Z-Wave service unless it is the only service present.
0.1.5 (25.07.2025)
- Added support for 'alarm_*' services (alarms).
0.1.4 (25.07.2025)
- Added support for 'media_player' service.
- Removed demo mode 'optimistic' override causing switches to look weird.
- Updated demo mode fake state handling.
- Added support for 'siren_ctrl' service (alarm sirens).
0.1.3 (25.07.2025)
- Added support for 'chargepoint' service (EV chargers).
- Updated demo mode data to add thermostat with dual setpoint system (heat+cool).
- Added default entities names.
0.1.2 (24.07.2025)
- Added support for 'water_heater' service (devices such as water boiler or a water tank).
- Updated demo mode data.
- Added extracting device manufacturer name.
- Updated 'thermostat' service implementation.
- Added logic to skip redundant services already represented by higher-level entities (e.g., sensor_temp/thermostat, sensor_wattemp/water_heater).
0.1.1 (24.07.2025)
- Set 'battery' entity category to 'diagnostic' to hide it from the main HA view.
- Do not expose 'battery' entity twice if it supports both level and low/high binary state.
- Changed the default 'sensor_lumin' unit from 'Lux' to 'lx'.
- Added support for 'indicator_ctrl' service (identify devices).
- Added support for 'barrier_ctrl' service (devices like garage doors, barriers, and window shades).
0.1.0 (24.07.2025)
Initial beta release
- Integration with Futurehome hub: maps all device metadata to Home Assistant devices/entities.
- Real-time updates for device states and availability.
- Device control features aligned with the official Futurehome app.
- Supports most Futurehome services (see README for details) (enough to be useful! 🎉).
0.0.1 (21.07.2025) - 0.0.38 (24.07.2025)
- Development.