The following patches will move CPU-specific code into separate files,
so expose the most used SPR registration functions:
register_sdr1_sprs | 22 callers
register_low_BATs | 20 callers
register_non_embedded_sprs | 19 callers
register_high_BATs | 10 callers
register_thrm_sprs | 8 callers
register_usprgh_sprs | 6 callers
register_6xx_7xx_soft_tlb | only 3 callers, but it helps to
keep the soft TLB code consistent.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-25-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Initial intent for the spr_tcg header was to expose the spr_read|write
callbacks that are only used by TCG code. However, although these
routines are TCG-specific, the KVM code needs access to env->sprs
which creation is currently coupled to the callback registration.
We are probably not going to decouple SPR creation and TCG callback
registration any time soon, so let's rename the header to spr_common
to accomodate the register_*_sprs functions that will be moved out of
cpu_init.c in the following patches.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-24-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is just to have 755-specific registers contained into a function,
intead of leaving them open-coded in init_proc_755. It makes init_proc
easier to read and keeps later patches that touch this code a bit
cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-16-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 745 and 755 can share the HID registration, so move it all into
register_755_sprs, which applies for both CPUs.
Also rename that function to register_745_sprs, since the 745 is the
earliest of the two. This will help with separating 755-specific
registers in a subsequent patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The radix on vhyp MMU uses a single-level radix table walk, with the
partition scope mapping provided by the flat QEMU machine memory.
A subsequent change will use the two-level radix walk on vhyp in some
situations, so provide a helper which can abstract that logic.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-5-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Invalid or missing partition table entry exceptions should cause HV
interrupts. HDSISR is set to bad MMU config, which is consistent with
the ISA and experimentally matches what POWER9 generates.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-2-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We currently abort QEMU during the dispatch of an interrupt if we try
to set MSR_HV without having MSR_HVB in the msr_mask. I think we
should verify this for all MSR bits. There is no reason to ever have a
MSR bit set if the corresponding bit is not set in that CPU's
msr_mask.
Note that this is not about the emulated code setting reserved
bits. We clear the new_msr when starting to dispatch an exception, so
if we end up with bits not present in the msr_mask that is a QEMU
programming error.
I kept the HSRR verification for BookS because it is the only CPU
family that has HSRRs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DLTLB
POWERPC_EXCP_DSI
POWERPC_EXCP_DSTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_IFTLB
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 7xx CPUs
(740, 745, 750, 750cl, 750cx, 750fx, 750gx, 755). This commit copies
powerpc_excp_legacy verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fabiano Rosas
Nicholas Piggin
Víctor Colombo