The framebuffer emulated by this new component is fake in the sense that the
real targets don't have it, but this does make it possible to have a GUI
for programs that will run on the ESP32* targets.
This is an SSIPeripheral instance that knows how to respond to read_id
command. It doesn't store any data. It is sufficient for the IDF
driver to decide to turn on the PSRAM cache. Actual data storage in
PSRAM is emulated by the cache module.
Co-authored-by: Omar Chebib <omar.chebib@espressif.com>
Co-authored-by: Throows <throowsdev@gmail.com>
Since commit 5286c36622 ("target/i386: properly reset TSC on reset")
QEMU writes the special value of "1" to each online vCPU TSC on VM reset
to reset it.
However parked vCPUs don't get that handling and due to that their TSCs
get desynchronized when the VM gets reset.
This in turn causes KVM to turn off PVCLOCK_TSC_STABLE_BIT in its exported
PV clock.
Note that KVM has no understanding of vCPU being currently parked.
Without PVCLOCK_TSC_STABLE_BIT the sched clock is marked unstable in
the guest's kvm_sched_clock_init().
This causes a performance regressions to show in some tests.
Fix this issue by writing the special value of "1" also to TSCs of parked
vCPUs on VM reset.
Reproducing the issue:
1) Boot a VM with "-smp 2,maxcpus=3" or similar
2) device_add host-x86_64-cpu,id=vcpu,node-id=0,socket-id=0,core-id=2,thread-id=0
3) Wait a few seconds
4) device_del vcpu
5) Inside the VM run:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is 1.
6) Reboot the VM
7) Once the VM boots once again run inside it:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is now 0.
Fixes: 5286c36622 ("target/i386: properly reset TSC on reset")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/5a605a88e9a231386dc803c60f5fed9b48108139.1734014926.git.maciej.szmigiero@oracle.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3f2a05b31ee9ce2ddb6c75a9bc3f5e7f7af9a76f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When allocating new temps during tcg_optmize, do not re-use
any EBB temps that were used within the TB. We do not have
any idea what span of the TB in which the temp was live.
Introduce tcg_temp_ebb_reset_freed and use before tcg_optimize,
as well as replacing the equivalent in plugin_gen_inject and
tcg_func_start.
Cc: qemu-stable@nongnu.org
Fixes: fb04ab7ddd ("tcg/optimize: Lower TCG_COND_TST{EQ,NE} if unsupported")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2711
Reported-by: wannacu <wannacu2049@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 04e006ab36a8565b92d4e21dd346367fbade7d74)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio,pc,pci: bug fixes, new test
Some small bug fixes, notably a fix for a regression
in cpu hotplug after migration. I also included a
new test, just to help make sure we don't regress cxl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdHJRIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpTkQIAJYFpFTPRnO8mA6gurfheB7Jt0ywAMrjKWfg
# uEkfZXXSQeCS8NBNPoZt7S8AE6xHE2a4b5lNWiS4a4coFmgTjtKPM8YsU01riyRk
# EasRxynGua2XGUWGK93r9L27v9zGz/vRC0Lujmw3VAUKGeL7a17KzmxwXLXe+DzS
# PgcI/H5hqoCDalT8aF6wOEDaWIHeo4dauDubYavW/+yaPtUvmy9MBkXbIV4iYqT5
# V6geeYIKW/yE/GHxxXOw/RE1FgpiZhebtQP26jPTSk0z/JaV5S0DNYs07joXmbaU
# fW5LSLgH3+oDI/GIhvsZ6hP87rVXBdaAogeJqT8SsuChBR55TpY=
# =B7KB
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Nov 2024 13:56:34 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
vhost: fail device start if iotlb update fails
bios-tables-test: Add data for complex numa test (GI, GP etc)
bios-tables-test: Add complex SRAT / HMAT test for GI GP
bios-tables-test: Allow for new acpihmat-generic-x test data.
qapi/qom: Change Since entry for AcpiGenericPortProperties to 9.2
hw/acpi: Fix size of HID in build_append_srat_acpi_device_handle()
qapi: fix device-sync-config since-version
hw/cxl: Check for zero length features in cmd_features_set_feature()
tests/acpi: update expected blobs
Revert "hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug"
Revert "hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states"
qtest: allow ACPI DSDT Table changes
vhost_net: fix assertion triggered by batch of host notifiers processing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 2d6cfbaf17.
The patch is supposed to be part of ARM CPU hotplug series and has not value
on its own without it. The series however is still in RFC stage and outside
of scope 9.2 release.
On top of that it introduces not needed callback that pokes directly into
CPU state without any need for that. Instead properties and AML generator
option should be used to configure static platform depended vCPU presence
state.
Drop the patch so that corrected version could be posted along with
ARM CPU hotplug series and properly reviewed in relevant context.
That also helps us to keep history cleaner with new patch being
against original code vs a string of fixups on top of current mess.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmdFRyQACgkQ7wSWWzmN
# YhFU1Qf/T9bBOCrbQqbZSG7eKk8QuH35zcgNU7FzFTrGeVCc1bUMNYhiioqAFmE+
# h5h/3vmkmt+01vaTuimTRumI2SJnFFwggveJDWf+ICSl9MRtCXB5+w0n71vJ6gUO
# njm36pIl+aMkZIrsDc7lLewVouZkF8mAKP7mn9x53s5lX/HbXZSdPJmrkdUXtNT5
# d3nXlUkNhEWKL9dKIQ9dWYmj3l+tLfuYPiR8a+kKFMEwHlGBuFbNoVN03v5VvFyf
# Dmy1P1ZFApP0SsR4SiccXg7C8AslBC6wc7Bhd0aiKpGBnlt20mE9EJSVyrU8yP1p
# UTKzzB0QHN7Nnd6AcFRhWvo9C74mGg==
# =qP+q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Nov 2024 03:57:24 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
virtio-net: Add queues before loading them
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
testing, docs and plugin updates for rc2
- cleanup leftover avocado bits from functional test
- ensure we keep functional logs for tests
- improve test console handling to detect prompts
- remove hacking timer.sleep() usage in functional tests
- convert Aarch64 tuxrun tests to functional test
- update Aarch64 tuxrun images to avoid corrupt blk I/O ops
- auto-generate the TCG plugin API symbols to avoid missing them
- fix rust pl011 model handling of DeviceID regs
- update docs to refer to "commonly known identity"
- convert aspeed tests to functional framework and remove hacky sleeps
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmdEZXEACgkQ+9DbCVqe
# KkRdMAf+JoSdKn3ck/eji270bZ2Y3evgDuP/qOZlcBtUJJ7+bUvhEOnBMApwKRD8
# u63hz7M4LIV5k3mezlEADf+oEpZ2FR3nIDM0dTY2CXYZm6av+0dNV0qFhXwjkslk
# aqJLiJYgNl3wsyn/ftYNLiBhCid0sOGMvEOFZI6ELBh5KH8eiNdyrsaD0GSmpwZi
# BsZUi8TOKy6EBeWnco/FLBV8ZVZUHuHNBl84jUY/8g7cxGMJfK8KoqMJ5XYoiQoJ
# 1dYDqFmoP24iQRks6K6beFRdS/CBet36Nhsv7We/gf17Msw5uFo7Cho+touRCMrK
# AmVKFdOX/OqJAHqlEKquYAD7bPjpaA==
# =Xa/M
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Nov 2024 11:54:25 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-9.2-rc2-updates-251124-1' of https://gitlab.com/stsquad/qemu: (28 commits)
tests/functional: Remove sleep workarounds from Aspeed tests
tests/functional: Convert Aspeed arm SDK tests
tests/functional: Convert Aspeed aarch64 SDK tests
docs: explicitly permit a "commonly known identity" with SoB
rust/pl011: Fix range checks for device ID accesses
plugins: eradicate qemu-plugins.symbols static file
plugins: detect qemu plugin API symbols from header
plugins: add missing export for qemu_plugin_num_vcpus
tests/functional: update the aarch64 tuxrun tests
tests/functional: Convert the Avocado aarch64 tuxrun tests
tests/functional: avoid accessing log_filename on earlier failures
tests/functional: add a QMP backdoor for debugging stalled tests
tests/functional: remove time.sleep usage from tuxrun tests
tests/functional: rewrite console handling to be bytewise
tests/functional: require non-NULL success_message for console wait
tests/functional: don't try to wait for the empty string
tests/functional: logs details of console interaction operations
tests/functional: enable debug logging for QEMUMachine
tests/functional: honour requested test VM name in QEMUMachine
tests/functional: put QEMUMachine logs in testcase log directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call virtio_net_set_multiqueue() to add queues before loading their
states. Otherwise the loaded queues will not have handlers and elements
in them will not be processed.
Cc: qemu-stable@nongnu.org
Fixes: 8c49756825 ("virtio-net: Add only one queue pair when realizing")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Convert the data parameter of net_checksum_calculate() to void * to
save unnecessary casts for callers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now we have official uint32_t bit array functions in bitops.h, use
them instead of the hand-rolled local versions.
We retain gic_bmp_replace_bit() because bitops doesn't provide that
specific functionality.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-3-peter.maydell@linaro.org
Currently bitops.h defines a set of operations that work on
arbitrary-length bit arrays. However (largely because they
originally came from the Linux kernel) the bit array storage is an
array of 'unsigned long'. This is OK for the kernel and even for
parts of QEMU where we don't really care about the underlying storage
format, but it is not good for devices, where we often want to expose
the storage to the guest and so need a type that is not
variably-sized between host OSes.
We already have a workaround for this in the GICv3 model:
arm_gicv3_common.h defines equivalents of the bit operations that
work on uint32_t. It turns out that we should also be using
something similar in hw/intc/loongarch_extioi.c, which currently
casts a pointer to a uint32_t array to 'unsigned long *' in
extio_setirq(), which is both undefined behaviour and not correct on
a big-endian host.
Define equivalents of the set_bit() function family which work
with a uint32_t array.
(Cc stable because we're about to provide a bugfix to
loongarch_extioi which will depend on this commit.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-2-peter.maydell@linaro.org
* Fixes & doc updates for the new "boot order" s390x bios feature
* Provide a "loadparm" property for scsi-hd & scsi-cd devices on s390x
(required for the "boot order" feature)
* Fix the floating-point multiply-and-add NaN rules on s390x
* Raise timeout on cross-accel build jobs to 60m
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmc7ercRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVjyg//ZuhSDCj+oBSU6vwM7Lwh3CS6GwZvGECU
# h60V3tizKypiRNtTJRXHoWcx95brXmoZgI+QQhDEXe3fFLkOEKT6AIlDhrKZRUsd
# rpLPr6O8TVKO+rSE7JVJAP3X1tpOOQDxnq83uWBv53b0S+Da0VwDRtI9gcugRMmh
# d58P8Q1bV344fQdcrebejstpSUG7RxSA4Plj2uSQx4mSHT7cy/hN+vA34Ha7reE3
# tcN9yfQq3Rmfvt0MV5I9Umd6JXEoDlEAwjSNsWRsCzo69jBZwiMtXSH8LyLtwRTp
# C919G/MIRuhvImF74dStLVCr82sNq54YR1NP6CGcmqPH76FOH8Mx3vmx9Cxj9ckA
# 6NI6SvIg++bW2O1efG2apz8p5fjbDzYXSAbHnaWTcEu3gPgH4PQ5QXoyKaDymvWV
# JIh5/gXEy+twEXgIBsdWQ44A9E06lL/tNfKnqGdXK4ZYF2JIrI+Lq7AKBee7tebP
# +72I4PljHLSHQ3GxdkoOeJ8ahu70IBdSz2/VEIwOWK1wIf5C5WFNBerLJyDmkyx8
# xIvIm0vlRLwPcuOC711nlaMaKqTNT+8W4DIqIY6fHs2Jy0psMdgey1uHQxYEj9Kh
# fg7CvalK8n3MkGAwTqAvRJIwMFe0a4Ss6c6CaemSaYa38ud/pCNnv+IT+Eqr+mjq
# 6y5PZWNrZi0=
# =UaDH
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Nov 2024 17:34:47 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-11-18' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d: Raise timeout on cross-accel build jobs to 60m
pc-bios: Update the s390 bios images with the recent fixes
pc-bios/s390-ccw: Re-initialize receive queue index before each boot attempt
pc-bios/s390x: Initialize machine loadparm before probing IPL devices
pc-bios/s390x: Initialize cdrom type to false for each IPL device
hw: Add "loadparm" property to scsi disk devices for booting on s390x
hw/s390x: Restrict "loadparm" property to devices that can be used for booting
docs/system/bootindex: Make it clear that s390x can also boot from virtio-net
docs/system/s390x/bootdevices: Update loadparm documentation
tests/tcg/s390x: Add the floating-point multiply-and-add test
target/s390x: Fix the floating-point multiply-and-add NaN rules
hw/usb: Use __attribute__((packed)) vs __packed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While adding the new flexible boot order feature on s390x recently,
we missed to add the "loadparm" property to the scsi-hd and scsi-cd
devices. This property is required on s390x to pass the information
to the boot loader about which kernel should be started or whether
the boot menu should be shown. But even more serious: The missing
property is now causing trouble with the corresponding libvirt patches
that assume that the "loadparm" property is either settable for all
bootable devices (when the "boot order" feature is implemented in
QEMU), or none (meaning the behaviour of older QEMUs that only allowed
one "loadparm" at the machine level). To fix this broken situation,
let's implement the "loadparm" property in for the SCSI devices, too.
Message-ID: <20241115141202.1877294-1-thuth@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ip_header is not actually guaranteed to be aligned. We attempt to
deal with this in some places such as net_checksum_calculate() by
using stw_be_p and so on to access the fields, but this is not
sufficient to be correct, because even accessing a byte member
within an unaligned struct is undefined behaviour. The clang
sanitizer will emit warnings like these if net_checksum_calculate()
is called:
Stopping network: ../../net/checksum.c:106:9: runtime error: member access within misaligned address 0x556aad9b502e for type 'struct ip_header', which requires 4 byte alignment
0x556aad9b502e: note: pointer points here
34 56 08 00 45 00 01 48 a5 09 40 00 40 11 7c 8b 0a 00 02 0f 0a 00 02 02 00 44 00 43 01 34 19 56
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../net/checksum.c:106:9 in
../../net/checksum.c:106:9: runtime error: load of misaligned address 0x556aad9b502e for type 'uint8_t' (aka 'unsigned char'), which requires 4 byte alignment
0x556aad9b502e: note: pointer points here
34 56 08 00 45 00 01 48 a5 09 40 00 40 11 7c 8b 0a 00 02 0f 0a 00 02 02 00 44 00 43 01 34 19 56
^
Fix this by marking the ip_header struct as QEMU_PACKED, so that
the compiler knows that it might be unaligned and will generate
the right code for accessing fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241114141619.806652-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In virtio-net.c we assume that the IP length field in the packet is
aligned, and we copy its address into a uint16_t* in the
VirtioNetRscUnit struct which we then dereference later. This isn't
a safe assumption; it will also result in compilation failures if we
mark the ip_header struct as QEMU_PACKED because the compiler will
not let you take the address of an unaligned struct field.
Make the ip_plen field in VirtioNetRscUnit a void*, and make all the
places where we read or write through that pointer instead use some
new accessor functions read_unit_ip_len() and write_unit_ip_len()
which account for the pointer being potentially unaligned and also do
the network-byte-order conversion we were previously using htons() to
perform.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241114141619.806652-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When compiling QEMU with --enable-cfi, the "q800" m68k machine
currently crashes very early, when the q800_machine_init() function
tries to wire the interrupts of the "via1" device.
This happens because TYPE_MOS6522_Q800_VIA1 is supposed to be a
proper SysBus device, but its parent (TYPE_MOS6522) has a mistake
in its class definition where it is only derived from DeviceClass,
and not from SysBusDeviceClass, so we end up in funny memory access
issues here. Using the right class hierarchy for the MOS6522 device
fixes the problem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2675
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 51f233ec92 ("misc: introduce new mos6522 VIA device")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241114104653.963812-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Check for overflow to avoid that fseek() receives a sign-extended value.
Cc: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* rust: cleanups
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
# EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
# Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
# qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
# VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
# ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
# =s591
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Nov 2024 18:00:50 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu: (39 commits)
dockerfiles: install bindgen from cargo on Ubuntu 22.04
rust: make rustfmt optional
rust: allow older version of bindgen
rust: do not use --generate-cstr
rust: allow version 1.63.0 of rustc
rust: clean up detection of the language
rust: do not use MaybeUninit::zeroed()
rust: introduce alternative implementation of offset_of!
rust: create a cargo workspace
rust: synchronize dependencies between subprojects and Cargo.lock
rust: silence unknown warnings for the sake of old compilers
rust: introduce a c_str macro
rust: use std::os::raw instead of core::ffi
rust: fix cfgs of proc-macro2 for 1.63.0
rust: patch bilge-impl to allow compilation with 1.63.0
rust/pl011: Use correct masks for IBRD and FBRD
rust/pl011: remove commented out C code
rust/pl011: add TYPE_PL011_LUMINARY device
rust/pl011: move CLK_NAME static to function scope
rust/pl011: add support for migration
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, we have no way to expose the arch-specific default cache
model because the cache model is sometimes related to the CPU model
(e.g., i386).
Since the user might configure "default" level, any comparison with
"default" is meaningless before the machine knows the specific level
that "default" refers to.
We can only check the correctness of the cache topology after the arch
loads the user-configured cache model from MachineState.smp_cache and
consumes the special "default" level by replacing it with the specific
level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-6-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Ivan Grokhotkov
Omar Chebib
Maksim Naumenko
Sachin Billore
Peter Buchegger
Maciej S. Szmigiero
Richard Henderson
Peter Maydell
Philippe Mathieu-Daudé
Igor Mammedov
Akihiko Odaki
Pierrick Bouvier
Thomas Huth
Alex Bennée
Roque Arcudia Hernandez
Mark Cave-Ayland
Paolo Bonzini
Zhao Liu