[env:esp32-32e]
platform = espressif32@6.10.0
board = esp32dev
framework = arduino
monitor_speed = 115200
upload_speed = 921600

board_build.partitions = partitions.csv

build_unflags = -w
build_flags =
  -w
  -DLUA_32BITS
  ; ST7796 and touch share HSPI; SD uses the separate VSPI bus
  -DUSER_SETUP_LOADED
  -DST7796_DRIVER
  -DTFT_WIDTH=320
  -DTFT_HEIGHT=480
  -DUSE_HSPI_PORT
  -DTFT_MOSI=13
  -DTFT_MISO=12
  -DTFT_SCLK=14
  -DTFT_CS=15
  -DTFT_DC=2
  -DTFT_RST=-1
  ; TFT_eSPI only drives the backlight pin when both macros are set, so without
  ; TFT_BACKLIGHT_ON the panel renders correctly and stays dark.
  -DTFT_BL=27
  -DTFT_BACKLIGHT_ON=HIGH
  -DSPI_FREQUENCY=40000000
  -DSPI_TOUCH_FREQUENCY=2500000
  -DLOAD_GLCD

lib_deps =
  bodmer/TFT_eSPI@^2.5.43
  https://github.com/PaulStoffregen/XPT2046_Touchscreen.git