Moving to Neoverse-N2 gives us several cpu features to use for expanding
our platform:
- branch target identification
- pointer authentication
- RME for confidential computing
- RNG for EFI_PROTOCOL_RNG
- SVE being enabled by default
We do not go for "max" as default to have stable set of features enabled
by default. It is still supported and can be selected with "--cpu"
argument.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240523165353.6547-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Partial support for NUMA setup:
- cpu nodes
- memory nodes
Used versions:
- Trusted Firmware v2.11.0
- Tianocore EDK2 stable202405
- Tianocore EDK2 Platforms code commit 4bbd0ed
Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the GICv2 specification section 4.3.12, "Interrupt Processor
Targets Registers, GICD_ITARGETSRn":
"Any change to a CPU targets field value:
[...]
* Has an effect on any pending interrupts. This means:
- adding a CPU interface to the target list of a pending interrupt makes that
interrupt pending on that CPU interface
- removing a CPU interface from the target list of a pending interrupt
removes the pending state of that interrupt on that CPU interface."
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524113256.8102-3-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using -fsanitize=undefined with Clang v18 causes an error if function
pointers are casted:
qapi/qapi-clone-visitor.c:188:5: runtime error: call to function visit_type_SocketAddress through pointer to incorrect function type 'bool (*)(struct Visitor *, const char *, void **, struct Error **)'
/tmp/qemu-ubsan/qapi/qapi-visit-sockets.c:487: note: visit_type_SocketAddress defined here
#0 0x5642aa2f7f3b in qapi_clone qapi/qapi-clone-visitor.c:188:5
#1 0x5642aa2c8ce5 in qio_channel_socket_listen_async io/channel-socket.c:285:18
#2 0x5642aa2b8903 in test_io_channel_setup_async tests/unit/test-io-channel-socket.c:116:5
#3 0x5642aa2b8204 in test_io_channel tests/unit/test-io-channel-socket.c:179:9
#4 0x5642aa2b8129 in test_io_channel_ipv4 tests/unit/test-io-channel-socket.c:323:5
...
It also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
The problematic casts are necessary to pass visit_type_T() and
visit_type_T_members() as callbacks to qapi_clone() and qapi_clone_members(),
respectively. Open-code these two functions to avoid the callbacks, and
thus the type casts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2346
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240524-xkb-v4-3-2de564e5c859@daynix.com>
[thuth: Improve commit message according to Markus' suggestions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
LeakSanitizer complains about allocations whose references are held
only by automatic variables. It is possible to free them to suppress
the complaints, but it is a chore to make sure they are freed in all
exit paths so make them static instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240524-xkb-v4-1-2de564e5c859@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running the update-linx-headers.sh script, it currently fails with:
scripts/update-linux-headers.sh: line 73: .../qemu/standard-headers/asm-x86/setup_data.h: No such file or directory
The "include" folder is obviously missing here - no clue how this could
have worked before?
Fixes: 66210a1a30 ("scripts/update-linux-headers: Add setup_data.h to import list")
Message-ID: <20240527060126.12578-1-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are reusing the same temporary directory for installing the headers
of all targets, so there could be stale files here when switching from
one target to another. Make sure to delete the folder before installing
a new set of target headers into it.
Message-ID: <20240527060243.12647-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set per_address and ilen in per_ifetch; this is valid for
all PER exceptions and will last until the end of the
instruction. Therefore we don't need to give the same
data to per_check_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-13-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop from argument, since gbea has always been updated with
this address. Add ilen argument for setting int_pgm_ilen.
Use update_cc_op before calling per_branch.
By raising the exception here, we need not call
per_check_exception later, which means we can clean up the
normal non-exception branch path.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-10-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Always use a tcg branch, instead of movcond. The movcond
was not a bad idea before PER was added, but since then
we have either 2 or 3 actions to perform on each leg of
the branch, and multiple movcond is inefficient.
Reorder the taken branch to be fallthrough of the tcg branch.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240502054417.234340-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using exception unwind via tcg_s390_program_interrupt,
we discard the current value of psw.addr, which discards
the result of a branch.
Pass in the address of the next instruction, which may
not be sequential. Pass in ilen, which we would have
gotten from unwind and is passed to the exception handler.
Sync cc_op before the call, which we would have gotten
from unwind.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-2-richard.henderson@linaro.org>
[thuth: Silence checkpatch.pl errors]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Block jobs patches for 2024-04-29
v2: add "iotests/pylintrc: allow up to 10 similar lines" to fix
check-python-minreqs
- backup: discard-source parameter
- blockcommit: Reopen base image as RO after abort
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmZV4UwACgkQVh8kwfGf
# eftBIA/9Em1xR7yEK5gE9kiGc+qSBsRPB8sJZ/JB+GukDPvzQ+/CktIJJgTryI/q
# QC08KyHnuE6WknUfJPkV5kfINj8vTDtkMjwgccrMu8enc9W5wnRfVBQomS8qWpZY
# maJhyW+Sva7k82v/U1mpdur5cTF1cu8VmwMSNurBYVd84E33KHkgQikEbXSLzFBu
# N8dG4WOgtwuLmP5BMgg5ftzwC3W7qv+sq1DhnZwDATUKVbjX1lLtKAYwu66bH8du
# ekZtWqtJNJqRTcOIiSyl52lPm3xo9+U8khXWQ/lmq1jjvdKcC90y76bT16yIQw98
# 74aBiKSRu2MO/EraEgPQKU2LpSzbzr4Eu1kRjmDXcVDAB183vaFW3Ogym8BuGJ9n
# ZiNFYLZqOqUL4RkyaXEwci6THEyjHqQvK2HYGmjoidZPvATf5G52FWrKZT3S9LVT
# Q4oUhb6dQW4EtU4WoVJpqSg7xozVI/swJ04+gLTjQskitXQm2jX8ifD6MI+85tVp
# nntS5BtMfTe/z5K4L7bv8KOe7J+gK0NUo3YCdw3zQKa+u7tX/QQKnPmNtUK8ohjO
# g6wIuwrxn/GsHxvXaeOKftHyXBGDHYUSuIr7ByQ/WxS9nQaWW1UKk9WFC/XtUFND
# bHMfL+DidkUxMnZBe7Snz6gb16oEr0DsrsSyHe/J2dWrid6QJVA=
# =aSvT
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 May 2024 06:51:08 AM PDT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg: aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* tag 'pull-block-jobs-2024-04-29-v2' of https://gitlab.com/vsementsov/qemu:
iotests/pylintrc: allow up to 10 similar lines
iotests: add backup-discard-source
qapi: blockdev-backup: add discard-source parameter
block/copy-before-write: create block_copy bitmap in filter node
block/copy-before-write: support unligned snapshot-discard
block/copy-before-write: fix permission
blockcommit: Reopen base image as RO after abort
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson
Marcin Juszkiewicz
Sebastian Huber
Akihiko Odaki
Thomas Huth
Alexander Bulekov